| Features and Benefits |
- This Tab/Quick Disconnect was designed for SMT or THT
applications
- Ideal for demanding applications
- Applicable for SMT reflow process or THT wave soldering
- High retention forces
- Tabs don’t float during reflow
- Shoulder on the part provides a stand-off for the mating part
from the PCB
- Retains typical through-hole Quick Disconnect Tab features
- Designed for automation using the customer’s existing pick and
place equipment and a special feeder - no time consuming
hand placement or costly fixturing required
- Can be automated using standard tape feeders
|
| Loose |
N/A |
| Reeled |
6284 |
| Hole Dimension |
0.070" (1.78mm) hole |
| Material Thickness / Type |
0.032" (0.81mm) C26000 Brass |
| Standard Finish |
100% Matte Tin over Copper (0) |
| Current Rating |
25 Amperes |
| UL File Number |
E146208  |
|
Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department. |
|
|
