Part Numbers 1302 / 6302 / 1302-2-HDR / 1302-2-HDR-T

Features and Benefits

This Zierick product is one of the most economical ways to terminate wire to a printed circuit board.
Part placement can be automated.
It has high resistance to shock and vibration.
There is no need to strip the wire.
The wire is terminated by using a Zierick crimping press.
It is also available in taped format and taped header format for low volume users.

Resources

Drawings

2D drawing (online view)

Application Drawing (print quality pdf) for 1302

Additional Resources

Printer Friendly Version

Technology Overview

Disclaimer

Product specifications listed on the website, catalog, or any documents that may fall under the category of promotional literature are subject to change without notice without creating liability to Zierick Manufacturing Corporation. Please contact us for the most current prints and dimensions.

Loose Part No.	1302	1302-2-HDR
Reeled Part No.	6302	NA
Taped Part No.	NA	1302-2-HDR-T
Wire Size	Approximately .100" Thick x .200" Wide
Material Thickness / Type	.020 C26000 Brass
Standard Finish	Pre-finished 100% Matte Tin over Copper. Edges will be bare. (16)
Feeder System	SMT Feeder for Loose Piece Terminals Standard 16mm Tape Feeder
Crimping System	MP-1000 Crimping Machine (for high volume applications) Versa-Crimp (for low volume applications)
	Zierick recommends .006" (0.15mm) stencil thickness for most applications. For other stencil thicknesses, call Zierick's product development department.

See What We Have to Offer

surface mount connectors
through hole connectors
interconnection hardware
equipment
custom solutions
order a sample box

Learn More about Zierick

about us
employment
zierick in action
news
rep and distributor locator
product guarantee
directions

Get Help When You Need It